DPU110r Lec970 Reversible Vibratory Plate

DPU110r Lec970 Reversible Vibratory Plate

5100026786

Categories

Compaction ,Vibratory Plates ,Reversible Vibratory Plates ,

Product Details

Vibratory plate with unique steering behavior: Very easy to steer due to the remote control with two joysticks. Travel

speed and rotation possible simultaneously, allowing for accurate turning of curves and a fast working speed

Large infrared receiver eye, well-protected from damage: Gives when impacted or folds in

Time-tested and proven safety features of infrared receiver eye technology: Proximity (nearness) recognition sensor

protects the operator, machine standstill if the clear line of sight is interrupted

Remote control in the unit can be charged under lockable hood

Low overall height for compact working and transport dimensions

Sturdy, two-piece steel frame hood, lockable

Fold-down lifting eye, optimally shaped for using various tackle

Start at the push of a button, automatic start after the warm-up phase prevents a cold start that stresses the

machine

Operator's panel, 12 languages available: Electronic operating displays, diagnostic menu, including for battery

voltage, engine speed, coolant temperature, error memory

Compatec: Easy to understand display for compaction control with 8 LEDs, incl. machine protection sensor, which

protects the machine from overload when driving on hard sub-surface. Programmable behavior: Warning flashing,

RPM reduction or shutdown of the machine

Programmable anti-theft PIN

Hood can be opened without tools by swinging open, offers quick and spacious access to all control and

maintenance parts

Large air filter for long service life

Large tank, fill level can be seen from outside

Quiet liquid-cooled engine

Four large tie-downs on the base plate, very easily accessible, even from outside of the loading area

ELECTRICAL SYSTEM-1

Remote Control Bat. Capacity : 8 h

Recommended Battery Typ : Ni-MH 7,2V/2000mAh

Remote Control Range : 20 m

Charging Time : 2,00 h

ELECTRICAL SYSTEM-2

Remote Control Bat. Capacity : 65,6 Foot

Recommended Battery Typ : Ni-MH 7,2V/2000mAh

Remote Control Range : 65,6 Foot

Charging Time : 2,00 h

ENVIRONMENT DATA-1

Storage temperature range : -20 - 50 C

Sound level LpA : 89,0 dB(A)

Sound level LpA (Standard) : EN 500-4

Operating temperature range : -10 - 50 C

Sound power LWA, measured : 108,0 dB(A)

Sound power LWA, guaranteed : 109,0 dB(A)

Sound power LWA (Standard) : EN 500-4

ENVIRONMENT DATA-2

Storage temperature range : -4 - 122 F

Sound level LpA : 89,0 dB(A)

Sound level LpA (Standard) : EN 500-4

Operating temperature range : 14 - 122 F

Sound power LWA, measured : 108,0 dB(A)

Sound power LWA, guaranteed : 109,0 dB(A)

Sound power LWA (Standard) : EN 500-4, 2000/14/EG

MECHANICAL - OUTPUT DETAILS-1

Vibrations : 3.600 1/min

Vibrations (Hz) : 60 Hz

Centrifugal force : 110,000 kN

Area capacity : 1.630 m2/h

Forward Running : 28,00 m/min

Gradeability : 32,0 %

Transmission : ELHY

MECHANICAL - OUTPUT DETAILS-2

Vibrations : 3.600 1/min

Vibrations (Hz) : 60 Hz

Centrifugal force : 24.729 lbf

Area capacity : 17.545,3 ft2/h

Forward Running : 1,5 fps

Gradeability : 32,0 %

Transmission : ELHY

Engine-1

Cooling : water-cooling

Engine type : Diesel engine

Engine operating mode : four-stroke

Fuel : Diesel EN 590

Cylinder : 3

Cylinder capacity : 1.028 cm3

Tank capacity : 11,20 l

Oil filling max. : 2,40 l

Power rating max. : 18,5 KW

Engine speed (Power max.) : 3.600 1/min

Standard (Operating power) : ISO 3046 IFN

Operating Engine speed : 2.700 1/min

Engine Manufacturer : Kohler

Nominal Engine speed : 2.700 1/min

Effective power : 13,5 KW

Oil specification : SAE 10W-40

Standard (Effective power) : ISO 3046 IFN

Standard (Power max.) : ISO 3046 IFN

Operating power : 12,0 KW

Oil filling min. : 2,40 l

Upper idling speed ex load : 2.800 1/min

Exhaust-gas limit : EPA4 final+Directive 97/68/EG

Starter battery Voltage : 12 V

Starter type : E-starter

Oil volume incl. filter change : 2,40 l

Air cleaner : dry air filter

Battery capacity (nom. value) : 50 Ah

Inclined position max. : 25,0

Fuel consumption-L/hr : 3,30 L/hr

Fuel consumption 1.1 : 3,30 L/hr

Engine-2

Engine type : four-stroke

Engine operating mode : Diesel engine

Fuel : Diesel EN 590

Cylinder : 3

Cylinder capacity : 62,7 Inch3

Tank capacity : 3,0 gal US

Oil filling max. : 0,6 gal US

Power rating max. : 24,8 hp

Engine speed (Power max.) : 3.600 1/min

Standard (Operating power) : ISO 3046 IFN

Operating Engine speed : 2.700 1/min

Engine Manufacturer : Kohler

Nominal Engine speed : 2.700 1/min

Effective power : 18,1 hp

Cooling : water-cooling

Inclined position max. : 25,0

Oil specification : SAE 10W-40

Standard (Effective power) : ISO 3046 IFN

Upper idling speed ex load : 2.800 1/min

Starter battery Voltage : 12 V

Starter type : E-starter

Exhaust-gas limit : EPA4 final+Directive 97/68/EG

Oil volume incl. filter change : 0,6 gal US

Air cleaner : dry air filter

Battery capacity (nom. value) : 50 Ah

Standard (Power max.) : ISO 3046 IFN

Operating power : 16,1 hp

Fuel consumption 2.2 : 0,9 GPH US

Oil filling min : 0,6 gal US

Fuel consumption 2.1 : 0,9 GPH US

MECHANICAL DETAILS-1

Width : 970 mm

Height : 833 mm

Operating weight : 810,0 kg

Length Drawbar in op. pos. : 1.207 mm

Ground clearance : 830 mm

MECHANICAL DETAILS-2

Width : 38,2 "

Height : 32,8 "

Operating weight : 1.785,7 lb

Length Drawbar in op. pos. : 47,5 "

Ground clearance : 32,7 "

OPERATING FLUIDS-1

Tank capacity : 11,20 l

Exciter oil volume : 1,60 l

Hydraulic fluid type : Renolin MR 520

Exciter oil type : 75W-90 API GL-4

Cooling fluid volume : 4,40 l

Cooling fluid type : SAE J1034: Wasser (1:1)

Hydraulic fluid volume : 21,9 l

OPERATING FLUIDS-2

Tank capacity : 3,0 gal US

Cooling fluid type : SAE J1034: Wasser (1:1)

Hydraulic fluid type : Renolin MR 520

Exciter oil volume : 1,69 qt US

Exciter oil type : 75W-90 API GL-4

Cooling fluid volume : 4,6 qt US

Hydraulic fluid volume : 23,1 qt US

HYDRAULIC-1

Operating pressure hydraulics : 193,0 bar

max. perm. hydraulic pressure : 230,0 bar

HYDRAULIC-2

Operating pressure hydraulics : 2.798,5 psi

max. perm. hydraulic pressure : 3.335,0 psi

Comes With

Vibratory plate

Remote contro

Operator's manual

Machine configuration instructions