DPU6555He Reversible Vibratory Plate

DPU6555He Reversible Vibratory Plate

5100009637

Categories

Compaction ,Vibratory Plates ,Reversible Vibratory Plates ,

Product Detalis

Intuitive control handle: Control of the direction of movement as well as the speed in the same movement sequence

- without changing grip, both hands stay on the control handle

Low hand-arm-vibrations (well below 2.5 m/s)

Electronic hour meter

Height adjustable center pole

Electric starter with a loud signal tone generator to avoid unnecessary battery discharge

Safety setting: Machine moves away from the operator if the control handle is released

Large-sized engine with high power reserves for a long service life

Motor protection: Not possible to start with a low oil level

Thick, wear resistant base plate made from nodular cast iron

The engine and tank are protected by a sturdy frame, which is also useful for a sturdy tie-down during transport

ENVIRONMENT DATA-1

Storage temperature range : -15 - 40 C

Sound level LpA : 97,0 dB(A)

Sound level LpA (Standard) : EN 500-4

Operating temperature range : -15 - 40 C

Uncertainty in measurement HAV : 0,5 m/s2

Sound power LWA, measured : 0,5 m/s2

Sound power LWA, guaranteed : 109,0 dB(A)

Sound power LWA (Standard) : EN 500-4, 2000/14/EG

HAV summation (Standard) : EN 500-4

HAV summation (average value) : 2,5 m/s2

ENVIRONMENT DATA-2

Storage temperature range : 5 - 104 F

Sound level LpA : 97,0 dB(A)

Sound level LpA (Standard) : EN 500-4

Operating temperature range : 5 - 104 F

Uncertainty in measurement HAV : 1,6 ft/s2

Sound power LWA, measured : 108,0 dB(A)

Sound power LWA, guaranteed : 109,0 dB(A)

HAV summation (average value) : 8,2 ft/s2

Sound power LWA (Standard) : EN 500-4

HAV summation (Standard) : EN 500-4

MECHANICAL - OUTPUT DETAILS-1

Vibrations : 4.150 1/min

Vibrations (Hz) : 69 Hz

Centrifugal force : 65,000 kN

Area capacity : 1.200 m2/h

Forward Running : 28,00 m/min

Gradeability : 46,6 %

Transmission : FKR

MECHANICAL - OUTPUT DETAILS-2

Vibrations : 4.150 1/min

Vibrations (Hz) : 69 Hz

Centrifugal force : 14.613 lbf

Area capacity : 12.916,8 ft2/h

Forward Running : 1,5 fps

Gradeability : 46,6 %

Transmission : FKR

Engine-1

Cooling : air cooling

Engine type : Diesel engine

Engine operating mode : our-stroke

Fuel : Diesel EN 590

Fuel consumption-Ib/h (Unite) : 1,90 L/hr

Cylinder : 1

Cylinder capacity : 667 cm3

Tank capacity : 6,00 l

Oil filling max. : 1,90 l

Power rating max. : 10,1 KW

Engine speed (Power max.) : 3.000 1/min

Standard (Operating power) : ISO 3046 IFN

Operating Engine speed : 3.010 1/min

Engine Manufacturer : Hatz

Nominal Engine speed : 2.800 1/min

Effective power : 9,6 KW

Oil specification : SAE 10W-40

Standard (Effective power) : ISO 3046 IFN

Standard (Power max.) : ISO 3046 IFN

Operating power : 6,8 KW

Oil filling min. : 1,00 l

Upper idling speed ex load : 3.080 1/min

Exhaust-gas limit : EPA/CARB FLEX

Starter type : E-starter

Air cleaner : dry air filter

Battery capacity (nom. value) : 45 Ah

Inclined position max. : 25,0

Engine-2

Engine type : Diesel engine

Engine operating mode : four-stroke

Fuel : Diesel EN 590

Fuel consumption -GPH US (Unite) : 0,5 GPH US

Cylinder : 1

Cylinder capacity : 40,7 Inch3

Tank capacity : 1,6 gal US

Oil filling max. : 0,5 gal US

Power rating max. : 13,5 hp

Engine speed (Power max.) : 3.000 1/min

Standard (Operating power) : ISO 3046 IFN

Operating Engine speed : 3.010 1/min

Engine Manufacturer : Hatz

Nominal Engine speed : 2.800 1/min

Effective power : 12,9 hp

Cooling : air cooling

Inclined position max. : 25,0

Oil specification : SAE 10W-40

Standard (Effective power) : ISO 3046 IFN

Upper idling speed ex load : 3.080 1/min

Starter type : E-starter

Exhaust-gas limit : EPA/CARB FLEX

Air cleaner : dry air filter

Battery capacity (nom. value) : 45 Ah

MECHANICAL DETAILS-1

Width : 710 mm

Height : 1.308 mm

Operating weight : 495,0 kg

Length Drawbar in op. pos. : 1.664 mm

Ground clearance : 861 - 1.005 mm

MECHANICAL DETAILS-2

Width : 51,5 "

Height : 51,5 "

Operating weight : 1.091,3 lb

Length Drawbar in op. pos. : 65,5 "

Ground clearance : 33,9 - 39,6 "

OPERATING FLUIDS-1

Tank capacity : 6,00 l

Exciter oil volume : 0,75 l

Hydraulic fluid type : Renolin MR 520

Exciter oil type : 75W-90 API GL-4

Hydraulic fluid volume : 0,5 l

OPERATING FLUIDS-2

Tank capacity : 1,6 gal US

Hydraulic fluid type : Renolin MR 520

Exciter oil volume : 0,79 qt US

Exciter oil type : 75W-90 API GL-4

Hydraulic fluid volume : 0,5 qt US

Comes With

Vibratory plate

Starting crank

Operator's manual