1700W Hydraulic Electric Rebar Cutter AND Bender (1" 25mm) #8

• The Powerful Portable Electric Rebar Cutter and Bender can cut and bend up to 1" (8) grade 60 rebar in about 4.5-5.5 seconds.
• Powered by a electric motor driving a hydraulic pump, draws about 11 amps @ 110 volts.
• This Rebar Cutter and Bender is widely used in steel mills, coal mines, railways, oil fields, bridges, highways, housing construction and other industries that need to cut and bend rebar as quickly as possible.
• Insert rebar between stopper and front cutter block, making sure that it is properly seated in U-shaped support.

Bender Features:

• Bends up to 1" (25mm) Grade 60 Rebar. 
• All gears are metal
• Preset angle locks for repeating the same angle bend. 
• Designed for portable and accurate bending. 
• The two slide-type angle selectors can be set to accurately bend any angle from 0-180 degrees. 
• Two standard foot pedal control switch for hands-free bending. 
• Extremely simple to operate. 
• Emergency Stop button and flush mounted star button for safety. 
• Motor only runs during bending operation with low noise. 

Bender Specifications:

• Power Supply/Voltage: 115V 50/60Hz - 14 AMPS 
• Bending Capacity: 1" (25mm) (#8)
• Bending Speed 7 Seconds for 180-degree bend 
• Bending Degree: 0 - 180 2 Foot Pedals (1 and 2 Points)
• Foot pedal included. 
• Tool kit is included. 
• Dimensions: 18"L x 17-1/2"W x 18-3/4"H. 
• Weight 210 lbs. (95 kg)
• Present two standard foot pedal to control switches for hands-free bending.
• Preset angle locks for repeating the same angle bending ,point 1/point 2 can be set .
• Rebar Bender is widely used for construction rebar, deformed steel bar, round steel bar and rebar rod bending

Cutter Features:

• CE ROHS Certified
• Power Supply: Electric motor driving a hydraulic pump
• Rebar Cutter Method: Open Jaw Shear
• Rapid replacement of blades
• Top carry handle,grip ergonomic
• Turn any angle of rotation, to adapt to different angles cutting
• Can cut off construction rebar, deformed steel bar, round steel bar and rebar rod

Cutter Specifications: 

• Voltage: 110V 50/60Hz 
• Wattage: 1700W 
• Max. Rebar: 1" (25mm) 8 
• Min. Rebar:.0.15" (4mm) 3 
• Cutting Speed:4.5-5.5 Seconds 
• Net Weight: 54lbs 
• Package List: 1xAccessories Bag 
• 1xHydraulic Oil Bottle 
• 3xAllen Wrench 
• 2xWrench 
• 1x Detailed Manual