Heavy Duty Electric Rebar Bender 1"and Rebar Cutter 1" Diameter Combo Set Portable

• Present two standard foot pedal to control switches for hands-free bending.
• Preset angle locks for repeating the same angle bending ,point 1/point 2 can be set .
• Rebar Bender is widely used for construction rebar, deformed steel bar, round steel bar and rebar rod bending.

 Electric Rebar Bender Heavy Duty with 2 Foot Controls Included RB 25 1" #8 

• Heavy Duty Rebar Bender heavily built with 1600W motor and all gears are metal that can bend up to 1" (25mm) Grade 60 Rebar. 
• Preset angle locks for repeating the same angle bend. 
• Designed for portable and accurate bending. 
• The two slide-type angle selectors can be set to accurately bend any angle from 0-180 degrees. 
• Two standard foot pedal control switch for hands-free bending. 
• Extremely simple to operate. 
• Emergency Stop button and flush mounted star button for safety. 
• Motor only runs during bending operation with low noise. 
• Rebar Bender designed for portable and accurate bending.

Specifications

• Power Supply/Voltage 115V 50/60Hz - 14 AMPS 
• Bending Capacity: 1" (25mm) (#8)
• Bending Speed 7 Seconds for 180-degree bend 
• Bending Degree: 0 - 180 2 Foot Pedals (1 and 2 Points)
• Foot pedal included. 
• Tool kit is included. 
• Dimensions: 18"L x 17-1/2"W x 18-3/4"H. 
• Weight 210 lbs. (95 kg)

1700W Hydraulic Electric Rebar Cutter (1" 25mm) #8 110V

• Powered by a electric motor driving a hydraulic pump, draws about 11 amps @ 110 volts.
• This Rebar Cutter is widely used in steel mills, coal mines, railways, oil fields, bridges, highways, housing construction and other industries need to quickly cut off the reinforcement of the place.
• Insert rebar between stopper and front cutter block, making sure that it is properly seated in U-shaped support.
• Pull trigger-switch and keep depressed while piston advances and rebar cutting
• When the cutting is completed, release switch. Piston retracts automatically.
• Specifications: 
• Voltage: 110V 50/60Hz 
• Wattage: 1700W  
• Bending Capacity: 1" (25mm) (#8)
• Cutting Speed:4.5-5.5 Seconds 
• Product Size: 18.8 x 5.9 x 10 
• Net Weight: 54lbs 
• Package List: 1xAccessories Bag 
• 1xHydraulic Oil Bottle 
• 3xAllen Wrench 
• 2xWrench 
• 1x Detailed Manual